The best way to Build a Home Bar
The best way to Build a Home Bar Every home bar has a style. You are able to have a wet bar built for between $2,000 and $12,000, or perhaps you are able to build the bar of yours and have features added for a tiny proportion of the price. You are able to bring something from a chromed foot railing to working taps. But underneath every personal style is actually the sturdy core of the design.
Allow me to share the basic steps to help you started with your DIY home bar.
Gather The Materials of yours
The wood you need is dependent on the dimensions you’ve in mind for the home bar of yours. Regardless of which dimensions you choose, you’ll need:
For the front and side panels:
Two pieces of 1/4″ plywood the length and height of the bar
Four pieces of 1/4″ plywood the depth and height of the bar
Enough 1×4″ wood rails to border place between the plywood panels every twelve inches
For the top of the bar:
Two pieces of 1×12″ plywood that are actually 6″ longer compared to the side panels
One piece of 1×12″ plywood cut to length
Three pieces of oak board measured to size
It’s common to also add bar molding, though you are able to keep your bar simple. Bar molding is actually designed to jut upwards before following more traditional molding designs so liquid collects on the top.
Assemble the Panels The plywood forms the inner and outer shell of the bar of yours. On among the pieces of plywood for every one of the 3 sides, lay the 1×4″ rails around the perimeter and vertically every 12-or-so inches. Fix them in place with wood glue. Next cover the front of each rail with wood glue and sandwich them in place with the remaining plywood. Secure the rails in place with nails. Now you’ve 3 reinforced panels, which is actually important: plywood is actually for form, and solid wood is actually for strength.
To assemble, butt the side panels against the edges of the front panel. Press the frame together with wood glue and clamps. Then drill pilot holes into the front of the bar and through the center of the side panels. Screw the panels together.
Include the Bar Top Probably The strongest way to construct your bar top is similar to building a brick wall: you need to interlock the layers so there are not any weak points.
Screw the side panels of the bar top into position. The backs should be flush with the advantage of the walls, overhang in the front by 6″, and have 6″ of overhang on the exterior side of the wall. They are going to be slightly off center.
Measure the distance between the 2 side portions of the bar top along the front. Cut the third piece of plywood to our length. Then screw it into position between the 2 side panels so it overhangs in the front by 6″(The front edge of the bar top should be a straight line).
Today you are able to add the oak board on top of the plywood. Cut the board equal to the total length of the bar top. Lay the oak board flush with the sides and screw it into position. Then measure and cut the oak board to fit flush with the bar top’s plywood sides. Screw them into place.
Touch up the nails and screws with filler before staining the bar. Dubai maid service
Extra Features for Your Home Bar Once you know how the core is actually constructed, you are able to add details. Each addition should be a part of the plan of yours from step one. Be sure you’ve the finished product of yours in mind before you start.
Outlets or perhaps sink
A wet bar is technically different from a regular home bar. A wet bar has a sink or perhaps other running water functions such as a soda and water hose – hence the name. Adding plumbing can be a DIY project in case you’ve the proper tools and know how.
Adding electrical outlets gives your bar extra functionality. This could require technical expertise. In the event that you would like to leave installing new pipes and wires to the pros, check out sites as Angie’s Homeadvisor and List to find electricians and plumbers who can help.
When you are assembling the bar top, cut the widths of your oak board to allow for the molding. Your front panel’s length will also have to be shortened by twice the size of the molding to ensure that you are able to wrap it around the corners.
Before you assemble the walls, measure and mark the height of the shelves on the inside panels. Then adhere and screw the shelf railing into place. Once you assemble the walls, slide board shelves onto the rails and nail them in position.
No matter the way you wish to customize the bar walls, nail the accents in place before starting the assembly of yours. This provides you with a flatter surface to work on.
When you’ve finished construction, it is time to search for the right bar stools, accessories, and to stock the essentials to truly make the bar part of yours of the home of yours.